Water-Based Release Agent for Polyurethane Flexible – Series 780

Release Agent for Polyurethanes – series 780 DESCRIPTION Water based release agent for flexible PU CHARACTERISTICS Liquid APPLICATION Clean well the mould Mould temperature between 40°C and 50°C, depending on the PU system Stir the product before and during use...

Water-Based Release Agent for Polyurethane Gel – Series 770

Release Agent for Gel in Polyurethanes – series 770 DESCRIPTION Water based release agent for PU gel CHARACTERISTICS Water base emulsion APPLICATION Clean well the mould Shake  before using Mould temperature 60-70°C  Spray using nozzle gun diam. 0.3 mm Tank...

Water-Based Release Agent for Polyurethane Rigid – Series 740

Release Agent for Polyurethanes – series 740 DESCRIPTION Water based release agent for rigid PU foams CHARACTERISTICS Liquid APPLICATION Clean well the mould Mould temperature between 50°C and 60°C, depending on the PU system Stir the product before and during...

Water-Based Release Agent for Polyurethane Integral – Series 720

Release Agent for Polyurethanes – series 720 DESCRIPTION Water based release agent for integral PU foams CHARACTERISTICS Liquid APPLICATION Clean well the mould Mould temperature between 50°C and 60°C, depending on the PU system Stir the product before and...

Mould conditioner – Series 735

Mould conditioner – series 735 DESCRIPTION Mould conditioner CHARACTERISTICS Viscous fluid  APPLICATION Clean well the mould Stir the product before use in order to ensure uniformity Apply the product by brush on the whole mould Remove excess by cotton...

Water-Based Release Agent for EVA – Series 750

Release Agent for EVA – series 750 DESCRIPTION Water based release agent for EVA CHARACTERISTICS Liquid APPLICATION Clean well the mould Mould temperature 170°C Stir the product and dilute it with water (suggested dilution 1 to 70) Stir the release agent before...

Water-Based Release Agent for Polyurethanes Soles – Series 710

Release Agent for Polyurethanes – series 710 DESCRIPTION Water based release agent for PU CHARACTERISTICS Liquid APPLICATION Clean well the mould Mould temperature between 50°C and 60°C, depending on the PU system Stir the product before and during use in order...