IMC – Water-Based In Mould Coating For PU Gel

serie 900

 

DESCRIPTION: Water based two-component in-mould-coating varnish for PU

 

CHARACTERISTICS:    Liquid water based. Possible to be used both as IMC or outside mould

 

APPLICATION

  • Clean well the mould
  • Shake the varnish before using
  • Prepare a solution of Catalyst 2300/… (5-7g) and varnish (100g)
  • Stir very well
  • Mould temperature: 60-70°C
  • Spray using nozzle gun diameter 1 mm
  • Spray the product at pressure 2,5 – 3,5 bar
  • Spray the product directly into the mould after the release agent or on the final piece

ADVANTAGES

  • No solvent content
  • Environmental friendly product
  • Small quantity
  • No need to use the spray machine
  • Savings in washing, colouring paste, processing

COLOURS

  • RAL/ Pantone colours
  • Special colours upon request
PACKING
  • Plastic can of 20 kg
  • Plastic drums of 100-200 kg

 

STORAGE
  • Store  in well closed original packing in a dry and ventilated place.
  • Shelf life, 12 months.
  • Avoid extreme cold-heat (preferably +5/30 °c)