Release Agent for EVA

– series 750

DESCRIPTION Water based release agent for EVA

CHARACTERISTICS

Liquid

APPLICATION

  • Clean well the mould
  • Mould temperature 170°C
  • Stir the product and dilute it with water (suggested dilution 1 to 70)
  • Stir the release agent before and during use in order to ensure uniformity
  • Prepare the mould applying the product in two/three homogeneous drafts at the normal processing temperature
  • Spray the product directly into the mould and start moulding
  • Apply at each cycle a uniform layer over the whole mould to ensure a proper release

ADVANTAGES

  • No solvent content
  • Environmental friendly product
  • Minimum residue on the mould

APPEARANCE

Milky white

PACKING
  • Plastic cans of 20 lt
  • Plastic drums of 100-200 lt
  • Cistern of 1000 lt
STORAGE
  • Store  in well closed original packing in a dry and ventilated place.
  • Shelf life, 12 months.
  • Avoid extreme cold-heat (preferably +5/30 °c)