Innovative products

Water-based release agent line, 100% silicon free, that couples an excellent releasability with the strongest interlayer bonding outsole/midsole (EN ISO 20344:2011 par 5.2).
Greatly appreciated it’s also the high matt level achieved, which confers a rubber look and feeling to the sole.
Compatible with both manual and robot/electrostatic application, the consumption is reduced up to 1/3 – 1/4 than a solvent-based analogue.

Water-based release agent line, that couples an excellent releasability with the strongest interlayer bonding outsole/midsole (EN ISO 20344:2011 par 5.2).
Greatly appreciated it’s also the possibility to get the desired mattness and a customized finishing.
Compatible with both manual and robot/electrostatic application, the consumption is reduced up to 1/3 – 1/4 than a solvent-based analogue.

Water-based release agent line, that couples an excellent releasability with a homogeneous and dry finishing, avoiding the talc step after mould extraction. It is the release agent itself that strongly reduce the polyurethane stickiness, optimizing the production process.
Compatible with both manual and robot/electrostatic application, the consumption is at least 1/2 than a solvent-based analogue.

By reacting simultaneously with the polyurethane foam while forming, IMC technology grants a stronger adhesion and abrasion resistance in comparison with classical varnishes. In addition, it boosts production efficiency by avoiding post-extraction substrate washing.
Moreover, the high covering power of these IMCs, make them compatible with every particular PU production process, without affecting the already existing industrial timing.

In addition the neutral version allows to create a matte or glossy finish.

In addition to Kezal classic water based IMC advantages, the 650 line gives to the substrate consistent anti-slippery properties while providing a pleasant rubber look and texture.

The line comprises the whole Pantone/ RAL colour ranges and a neutral version can be employed to get the above-mentioned effects without changing the original PU shade.

Double component line (2k) is formulated to further increase IMC resistance and durability thanks to the addition of a special catalyst.

Trials tested 2k IMC varnish efficacy in resisting over 50 rubbings with pure alcohol.

Therefore 2k IMC line provides an extraordinary protection against the harshest deterioring conditions, such as weathering, hydrolysis, bloodstains, detergents, alcohol and wear.

Kezal varnish line for rubber (SBR) is applied directly onto the substrate without any pre-activation step.

In addition to making the process more efficient and cost-effective, it maintains the natural sole flexibility, preventing the unavoidable stiffing generated by the use of halogenating solutions.

Kezal varnish line for TR is applied directly onto the substrate without any pre-activation step.

In addition to making the process more efficient and cost-effective, it maintains the natural sole flexibility, preventing the unavoidable stiffing generated by the use of halogenating solutions.

Kezal Rubber effect varnish line has been formulated in order to provide the rubber finishing and look to every type of PU material, thus obtaining a rubber-like effect in the most cost-effective way.

The Rubber effect line comprises one single coat, two coats & double component varnishes. The choice is at the customer’s needs!